Data Realms Fan Forums :: View topic - Need help on making Nanolyzer-like tool

Code:

AddAmmo = MOPixel
   PresetName = concreto 1
   Mass = 0.1
   RestThreshold = 500
   HitsMOs = 1
   GetsHitByMOs = 0
   Color = Color
      R = 143
      G = 143
      B = 143
   Atom = Atom
      Material = Material
         CopyOf = Wet Concrete
      TrailColor = Color // ------------------->LINE 14!!
         R = 143
         G = 143
         B = 143
      TrailLength = 0

AddAmmo = MOPixel
   PresetName = concreto 2
   Mass = 0.1
   RestThreshold = 500
   HitsMOs = 1
   GetsHitByMOs = 0
   Color = Color
      R = 115
      G = 115
      B = 115
   Atom = Atom
      Material = Material
         CopyOf = Wet Concrete
      TrailColor = Color
         R = 115
         G = 115
         B = 115
      TrailLength = 0

AddParticle = MOPixel
   PresetName = concreto Particle
   Mass = 0
   HitsMOs = 0
   GetsHitByMOs = 0
   LifeTime = 300
   GlobalAccScalar = 0
   AirResistance = 0.5
   Color = Color
      R = 255
      G = 0
      B = 255
   Atom = Atom
      Material = Material
         CopyOf = Air
      TrailColor = Color
         R = 255
         G = 0
         B = 255
      TrailLength = 0
   ScreenEffect = ContentFile
      FilePath = Base.rte/Effects/Glows/BlueTiny.bmp
   EffectStartTime = 0
   EffectStopTime = 400
   EffectStartStrength = 1
   EffectStopStrength = 0
      
AddAmmo = Round
   PresetName = Round concreto
   ParticleCount = 5
   Particle = MOPixel
      CopyOf = concreto Particle
   Shell = None
   FireVelocity = 12
   ShellVelocity = 0
   Separation = 5
      
AddAmmo = Round
   PresetName = Tracer concreto
   ParticleCount = 50
   Particle = MOPixel
      CopyOf = concreto Particle
      PresetName = concreto Particle B
      Mass = 0.5
      Sharpness = 10
   Shell = None
   FireVelocity = 16
   ShellVelocity = 0
   Separation = 5

AddAmmo = Magazine
   PresetName = Magazine concreto
   Mass = 2
   HitsMOs = 0
   GetsHitByMOs = 0
   SpriteFile = ContentFile
      FilePath = Base.rte/Null.bmp
   FrameCount = 1
   SpriteOffset = Vector
      X = -1
      Y = -1
   AtomGroup = AtomGroup
      AutoGenerate = 1
      Material = Material
         CopyOf = Bullet Metal
      Resolution = 2
      Depth = 0
   DeepGroup = AtomGroup
      AutoGenerate = 1
      Material = Material
         CopyOf = Bullet Metal
      Resolution = 3
      Depth = 1
   DeepCheck = 0
   JointStrength = 200
   JointStiffness = 1
   JointOffset = Vector
      X = 0
      Y = -3
   DrawAfterParent = 0
   RoundCount = 1500
   RTTRatio = 50
   RegularRound = Round
      CopyOf = Round concreto
   TracerRound = Round
      CopyOf = Tracer concreto
   Discardable = 0

AddDevice = HDFirearm
   PresetName = concreto
   AddToGroup = Tools
   Description = This tool converts things into concretes. really useful if you wanna make some defense from gibs and dropship parts!
   Mass = 6
   HitsMOs = 0
   GetsHitByMOs = 1
   ScriptPath = Techion.rte/Devices/Tools/Nanolyzer2.lua
   SpriteFile = ContentFile
      FilePath = Techion.rte/Devices/Sprites/Nanolyzer.bmp
   FrameCount = 2
   SpriteOffset = Vector
      X = -8
      Y = -5
   EntryWound = AEmitter
      CopyOf = Dent Metal
   ExitWound = AEmitter
      CopyOf = Dent Metal
   GoldValue = 100
   AtomGroup = AtomGroup
      AutoGenerate = 1
      Material = Material
         CopyOf = Military Stuff
      Resolution = 4
      Depth = 0
   DeepGroup = AtomGroup
      AutoGenerate = 1
      Material = Material
         CopyOf = Military Stuff
      Resolution = 4
      Depth = 10
   DeepCheck = 0
   JointStrength = 100
   JointStiffness = 0.5
   RecoilTransmission = 0
   JointOffset = Vector
      X = -4
      Y = 2
   DrawAfterParent = 0
   StanceOffset = Vector
      X = 12
      Y = 0
   SharpStanceOffset = Vector
      X = 13
      Y = -2
   SupportOffset = Vector
      X = -3
      Y = 3
   SharpLength = 0
   Magazine = Magazine
      CopyOf = Magazine concreto
   Flash = Attachable
      CopyOf = Techion.rte/Muzzle Flash Laser
   FireSound = Sound
      AddSample = ContentFile
         FilePath = Base.rte/Devices/Diggers/DiggerSound.wav
      LoopSetting = -1
   EmptySound = Sound
      AddSample = ContentFile
         FilePath = Base.rte/Devices/EmptyClick3.wav
   ReloadStartSound = Sound
      AddSample = ContentFile
         FilePath = Techion.rte/Effects/Sounds/LaserReloadStart.wav
   ReloadEndSound = Sound
      AddSample = ContentFile
         FilePath = Techion.rte/Effects/Sounds/LaserReloadEnd.wav
   RateOfFire = 3000
   ReloadTime = 3000
   FullAuto = 1
   FireIgnoresThis = 1
   ShakeRange = 2
   SharpShakeRange = 1
   NoSupportFactor = 2
   ParticleSpreadRange = 30
   ShellSpreadRange = 0
   ShellAngVelRange = 0
   MuzzleOffset = Vector
      X = 5
      Y = 0
   EjectionOffset = Vector
      X = -3
      Y = -3
   AddGib = Gib
      GibParticle = MOPixel
         CopyOf = Spark Yellow 1
      Count = 4
      Spread = 2.25
      MaxVelocity = 20
      MinVelocity = 8
   AddGib = Gib
      GibParticle = MOPixel
         CopyOf = Spark Yellow 2
      Count = 5
      Spread = 2.25
      MaxVelocity = 20
      MinVelocity = 8
   AddGib = Gib
      GibParticle = MOPixel
         CopyOf = Drop Oil
      Count = 4
      Spread = 2.25
      MaxVelocity = 10
      MinVelocity = 1
   AddGib = Gib
      GibParticle = MOSParticle
         CopyOf = Gib Metal Rust Micro A
      Count = 2
      Spread = 2.25
      MaxVelocity = 15
      MinVelocity = 5
   AddGib = Gib
      GibParticle = MOSParticle
         CopyOf = Gib Metal Grey Micro A
      Count = 3
      Spread = 2.25
      MaxVelocity = 15
      MinVelocity = 5
   AddGib = Gib
      GibParticle = MOSRotating
         CopyOf = Gib Device Small D
      Count = 1
      Spread = 2.25
      MaxVelocity = 10
      MinVelocity = 1
   AddGib = Gib
      GibParticle = MOSRotating
         CopyOf = Gib Device Small N
      Count = 1
      Spread = 2.25
      MaxVelocity = 10
      MinVelocity = 1
   GibWoundLimit = 3

Code:

function Create(self)
    --The number of goo particles available to pick from.
    self.gooCount = 2;
    
    --The range of the tool.
    self.range = 40;
    
    --The arc radius of the tool's beam.
    self.beamRadius = math.pi * 0.3;
    
    --The radial resolution of the beam.
    self.resolution = 0.05;
    
    --The chance of deconstructing a single particle.
    self.deconstructChance = 0.04;
end

function Update(self)
    if self:IsActivated() and not self:IsReloading() and self.RoundInMagCount > 0 then
        local aimAngle = self.RotAngle;
        if self.HFlipped then
            aimAngle = aimAngle + math.pi;
        end
        local aimVec = Vector(self.range, 0):RadRotate(aimAngle);
        local aimUp = Vector(aimVec.X, aimVec.Y):RadRotate(math.pi * 0.5):Normalize();
        local hitPos = Vector();
        
        --Cast rays in front of the gun.
        for i = -self.beamRadius * 0.5, self.beamRadius * 0.5, self.resolution do
            if math.random() < self.deconstructChance then
                if SceneMan:CastStrengthRay(self.MuzzlePos, Vector(aimVec.X, aimVec.Y):RadRotate(i), 1, hitPos, 0, 166, true) then
                    local remover = CreateMOSRotating("Techion.rte/Pixel Remover");
                    remover.Pos = hitPos;
                    MovableMan:AddParticle(remover);
                    remover:EraseFromTerrain();
                    
                    local piece = CreateMOPixel("Techion.rte/concreto " .. math.random(1, self.gooCount));
                    piece.Pos = hitPos;
                    MovableMan:AddParticle(piece);
                    piece.ToSettle = true;
                    
                    local glow = CreateMOPixel("Pixel Creation Glow","Constructor.rte");
                    glow.Pos = hitPos;
                    MovableMan:AddParticle(glow);
                end
            end
        end
    end
end

Author:	Icehamma [ Sun Nov 02, 2014 4:30 am ]
Post subject:	Need help on making Nanolyzer-like tool
I was tring to make a Nanolyzer-like tool that makes concretes instead of goo, but I always end up getting this message: Code: Could not match property Error happened in Techion.rte/Devices/Tools/Nanolyzer2.ini at line 14! And here's the INI file Code: AddAmmo = MOPixel PresetName = concreto 1 Mass = 0.1 RestThreshold = 500 HitsMOs = 1 GetsHitByMOs = 0 Color = Color R = 143 G = 143 B = 143 Atom = Atom Material = Material CopyOf = Wet Concrete TrailColor = Color // ------------------->LINE 14!! R = 143 G = 143 B = 143 TrailLength = 0 AddAmmo = MOPixel PresetName = concreto 2 Mass = 0.1 RestThreshold = 500 HitsMOs = 1 GetsHitByMOs = 0 Color = Color R = 115 G = 115 B = 115 Atom = Atom Material = Material CopyOf = Wet Concrete TrailColor = Color R = 115 G = 115 B = 115 TrailLength = 0 AddParticle = MOPixel PresetName = concreto Particle Mass = 0 HitsMOs = 0 GetsHitByMOs = 0 LifeTime = 300 GlobalAccScalar = 0 AirResistance = 0.5 Color = Color R = 255 G = 0 B = 255 Atom = Atom Material = Material CopyOf = Air TrailColor = Color R = 255 G = 0 B = 255 TrailLength = 0 ScreenEffect = ContentFile FilePath = Base.rte/Effects/Glows/BlueTiny.bmp EffectStartTime = 0 EffectStopTime = 400 EffectStartStrength = 1 EffectStopStrength = 0 AddAmmo = Round PresetName = Round concreto ParticleCount = 5 Particle = MOPixel CopyOf = concreto Particle Shell = None FireVelocity = 12 ShellVelocity = 0 Separation = 5 AddAmmo = Round PresetName = Tracer concreto ParticleCount = 50 Particle = MOPixel CopyOf = concreto Particle PresetName = concreto Particle B Mass = 0.5 Sharpness = 10 Shell = None FireVelocity = 16 ShellVelocity = 0 Separation = 5 AddAmmo = Magazine PresetName = Magazine concreto Mass = 2 HitsMOs = 0 GetsHitByMOs = 0 SpriteFile = ContentFile FilePath = Base.rte/Null.bmp FrameCount = 1 SpriteOffset = Vector X = -1 Y = -1 AtomGroup = AtomGroup AutoGenerate = 1 Material = Material CopyOf = Bullet Metal Resolution = 2 Depth = 0 DeepGroup = AtomGroup AutoGenerate = 1 Material = Material CopyOf = Bullet Metal Resolution = 3 Depth = 1 DeepCheck = 0 JointStrength = 200 JointStiffness = 1 JointOffset = Vector X = 0 Y = -3 DrawAfterParent = 0 RoundCount = 1500 RTTRatio = 50 RegularRound = Round CopyOf = Round concreto TracerRound = Round CopyOf = Tracer concreto Discardable = 0 AddDevice = HDFirearm PresetName = concreto AddToGroup = Tools Description = This tool converts things into concretes. really useful if you wanna make some defense from gibs and dropship parts! Mass = 6 HitsMOs = 0 GetsHitByMOs = 1 ScriptPath = Techion.rte/Devices/Tools/Nanolyzer2.lua SpriteFile = ContentFile FilePath = Techion.rte/Devices/Sprites/Nanolyzer.bmp FrameCount = 2 SpriteOffset = Vector X = -8 Y = -5 EntryWound = AEmitter CopyOf = Dent Metal ExitWound = AEmitter CopyOf = Dent Metal GoldValue = 100 AtomGroup = AtomGroup AutoGenerate = 1 Material = Material CopyOf = Military Stuff Resolution = 4 Depth = 0 DeepGroup = AtomGroup AutoGenerate = 1 Material = Material CopyOf = Military Stuff Resolution = 4 Depth = 10 DeepCheck = 0 JointStrength = 100 JointStiffness = 0.5 RecoilTransmission = 0 JointOffset = Vector X = -4 Y = 2 DrawAfterParent = 0 StanceOffset = Vector X = 12 Y = 0 SharpStanceOffset = Vector X = 13 Y = -2 SupportOffset = Vector X = -3 Y = 3 SharpLength = 0 Magazine = Magazine CopyOf = Magazine concreto Flash = Attachable CopyOf = Techion.rte/Muzzle Flash Laser FireSound = Sound AddSample = ContentFile FilePath = Base.rte/Devices/Diggers/DiggerSound.wav LoopSetting = -1 EmptySound = Sound AddSample = ContentFile FilePath = Base.rte/Devices/EmptyClick3.wav ReloadStartSound = Sound AddSample = ContentFile FilePath = Techion.rte/Effects/Sounds/LaserReloadStart.wav ReloadEndSound = Sound AddSample = ContentFile FilePath = Techion.rte/Effects/Sounds/LaserReloadEnd.wav RateOfFire = 3000 ReloadTime = 3000 FullAuto = 1 FireIgnoresThis = 1 ShakeRange = 2 SharpShakeRange = 1 NoSupportFactor = 2 ParticleSpreadRange = 30 ShellSpreadRange = 0 ShellAngVelRange = 0 MuzzleOffset = Vector X = 5 Y = 0 EjectionOffset = Vector X = -3 Y = -3 AddGib = Gib GibParticle = MOPixel CopyOf = Spark Yellow 1 Count = 4 Spread = 2.25 MaxVelocity = 20 MinVelocity = 8 AddGib = Gib GibParticle = MOPixel CopyOf = Spark Yellow 2 Count = 5 Spread = 2.25 MaxVelocity = 20 MinVelocity = 8 AddGib = Gib GibParticle = MOPixel CopyOf = Drop Oil Count = 4 Spread = 2.25 MaxVelocity = 10 MinVelocity = 1 AddGib = Gib GibParticle = MOSParticle CopyOf = Gib Metal Rust Micro A Count = 2 Spread = 2.25 MaxVelocity = 15 MinVelocity = 5 AddGib = Gib GibParticle = MOSParticle CopyOf = Gib Metal Grey Micro A Count = 3 Spread = 2.25 MaxVelocity = 15 MinVelocity = 5 AddGib = Gib GibParticle = MOSRotating CopyOf = Gib Device Small D Count = 1 Spread = 2.25 MaxVelocity = 10 MinVelocity = 1 AddGib = Gib GibParticle = MOSRotating CopyOf = Gib Device Small N Count = 1 Spread = 2.25 MaxVelocity = 10 MinVelocity = 1 GibWoundLimit = 3 And oh yeah, some lua script I slightly modified from the original Nanolyzer just to make sure that everything's correct Code: function Create(self) --The number of goo particles available to pick from. self.gooCount = 2; --The range of the tool. self.range = 40; --The arc radius of the tool's beam. self.beamRadius = math.pi * 0.3; --The radial resolution of the beam. self.resolution = 0.05; --The chance of deconstructing a single particle. self.deconstructChance = 0.04; end function Update(self) if self:IsActivated() and not self:IsReloading() and self.RoundInMagCount > 0 then local aimAngle = self.RotAngle; if self.HFlipped then aimAngle = aimAngle + math.pi; end local aimVec = Vector(self.range, 0):RadRotate(aimAngle); local aimUp = Vector(aimVec.X, aimVec.Y):RadRotate(math.pi * 0.5):Normalize(); local hitPos = Vector(); --Cast rays in front of the gun. for i = -self.beamRadius * 0.5, self.beamRadius * 0.5, self.resolution do if math.random() < self.deconstructChance then if SceneMan:CastStrengthRay(self.MuzzlePos, Vector(aimVec.X, aimVec.Y):RadRotate(i), 1, hitPos, 0, 166, true) then local remover = CreateMOSRotating("Techion.rte/Pixel Remover"); remover.Pos = hitPos; MovableMan:AddParticle(remover); remover:EraseFromTerrain(); local piece = CreateMOPixel("Techion.rte/concreto " .. math.random(1, self.gooCount)); piece.Pos = hitPos; MovableMan:AddParticle(piece); piece.ToSettle = true; local glow = CreateMOPixel("Pixel Creation Glow","Constructor.rte"); glow.Pos = hitPos; MovableMan:AddParticle(glow); end end end end end And the Devices.ini (I put my modded nanolyzer on the bottom of the original one) Code: //////////// //Tools IncludeFile = Techion.rte/Devices/Tools/Nanolyzer.ini IncludeFile = Techion.rte/Devices/Tools/Nanolyzer2.ini //My modded Nanolyzer //////////// //Explosives IncludeFile = Techion.rte/Devices/Explosives/Nanoswarm.ini IncludeFile = Techion.rte/Devices/Explosives/WarpGrenade.ini //////////// //Weapons IncludeFile = Techion.rte/Devices/Weapons/MicroPulsar.ini IncludeFile = Techion.rte/Devices/Weapons/PulseRifle.ini IncludeFile = Techion.rte/Devices/Weapons/GigaPulsar.ini IncludeFile = Techion.rte/Devices/Weapons/Nanorifle.ini IncludeFile = Techion.rte/Devices/Weapons/Nucleo.ini IncludeFile = Techion.rte/Devices/Weapons/DihelicalCannon.ini IncludeFile = Techion.rte/Devices/Weapons/NucleoSwarm.ini I thought that I've done everything correctly but no... Can anyone help me?

Author:	Corpsey [ Mon Nov 03, 2014 2:22 pm ]
Post subject:	Re: Need help on making Nanolyzer-like tool
Whoa, I tried to figure out what is not working and ended up in a state where I am really questioning how the nanolyzer works at all. If you create a COMPLETELY PERFECT copy of the nanolyzer, and give it new variables and new pointers to all new files, it doesn't work as effectively as the nanolyzer. Can anyone explain THAT? @_@ To answer your question though, usually an error like that is from the program trying to collect data that doesn't fit with what it is attempting to collect. Although, we can see here that that's not the case. After some testing, I think it comes down to the indentation. Make sure you are using the same spacing throughout the document (in this case, I think only TAB spacing works... it's not that difficult to switch from spacebar spacing to TAB spacing - just run a replace function on ' ' (3 spaces) for ' ' (a TAB, which you'll have to copy and paste into the replacement box). In fact, I've had CC run from inputting your code. It still doesn't explain why a carbon copy of the nanolyzer doesn't work @_@ so, good luck. Edit: I've found that the 'copy' wasn't working because of this line; SceneMan:CastStrengthRay(self.MuzzlePos, Vector(aimVec.X, aimVec.Y):RadRotate(i), 1, hitPos, 0, 166, true) which you can read about how to use here: viewtopic.php?f=73&t=30651&hilit=CastStrengthRay Basically, the nanolyzer uses this line to penetrate into terrain by searching for values and ignoring itself. So, to have it 'dig', you have to change '166' to the value of the material you're converting the terrain to based on it's material property (found in Base.rte/Materials.ini). For example, Wet Concrete is 164. Although, I think another function is that it actually pushes out air (The Tracers) to break the goo material it is replacing the terrain with... So most materials structural integrity is too great to dust away like the nanolyzer goo.

Author:	Icehamma [ Tue Nov 04, 2014 11:04 pm ]
Post subject:	Re: Need help on making Nanolyzer-like tool
OK I'll see if it works... Anyways if it doesn't rly work properly then I'll post more. EDIT: DAMN! It can't shoot through the terrain! It's just hit the outer parts of a terrain but will NEVER hit the inner parts! I'm pretty much screwed....

Data Realms Fan Forums http://45.55.195.193/

Need help on making Nanolyzer-like tool http://45.55.195.193/viewtopic.php?f=1&t=45842	Page 1 of 1

Page 1 of 1	All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/